Stop Fighting With Your Furnace Footprint
Let’s be honest: standard straight infrared lamps are great until you’re dealing with a non-standard bending furnace. If your oven layout is cramped, you can’t just force a stock tube into a tight corner and hope for the best. It doesn’t work. That’s why we bend the quartz glass and tweak the length to fit your specific chassis. No forcing, no bending the rules—just a perfect fit. Getting the shape right We do more than just cut tubes to length. We actually shape them. By bending the element, we make it follow the curve of your workpiece. This is huge because it kills those annoying cold spots. It ensures the heat actually hits the target at the right angle. Plus, if you’re working with a tiny gap, we measure everything to the millimeter. You won’t spend your afternoon fighting with oversized hardware just to get things installed. The heat vs. the hardware We stick with high-purity quartz because it can take the hit of rapid heating and cooling without cracking. But here’s the thing: when we play with filament length and voltage to control the watt density, things get hot. Really hot. A short, high-wattage tube packs a massive punch in a small area. Just make sure your cooling fans can keep up. If your housing can’t breathe and move that ambient heat, you’re going to fry your connectors. Making it all fit Custom shapes let you cram more heating power into a smaller space. You get more emitters per square inch, which means you can push more parts through without needing a bigger machine. We design these as drop-in replacements for the jigs you already have. Just wire them into your PID controllers and let the geometry do the heavy lifting. If your furnace is irregular, stop trying to make straight lamps work. It’s a losing battle. Custom shapes are the only way to get a steady, even heat when space is tight.